COKER “CKR” Series Cleaners
 COKER “CKR” Series cleaners allows resid, coke, asphalt, bunker or hard materials to be removed from clogged bleed valves during normal operations. Parts for these Coker Boss™ cleaners can be replaced in the field, ending the need for factory maintenance. All models (Patent No. 8,584,296). |
Field Replacement Parts Kits
Parts kits end the need for most factory service. Simply remove the nut on the handle plus the tube fitting at the body and remove the internal parts for complete field replacement in seconds. Parts kits are fully assembled at the factory and include end tube fitting, body tube fitting, tube, cutter, our unique wire rope, wire rope/push rod connector, safety stop (blow-out preventer), threaded push rod and nut for the angle models. Parts kits for the straight models include cutter, safety stop (blow-out preventer), threaded push rod and nut. We recommend a parts kit be obtained for each tool. When Parts Kits are needed simply add PK to the beginning of a model number. For example a model 6150L-84 requires PK6150L-84 parts kit.
All Three designs of bleeder cleaners are shown below. Available to fit your female NPT process connections in 1/4″, 1/2″, 3/4″, 1″ MNPT’s
A rod out device is the only safe tool available to clean clogged instrument taps, drain valves, manifolds and orifice taps. Available in diameters of from 1/8″ up to 5/8″ and in lengths from 7 inches to 72 inches with end connections from 1/4″ NPT to 1″ NPT. Never again use a dangerous contraption that has no pressure gauge or vent valve to rod out valves and taps. The standard rod out device is the type 1 unless otherwise selected below
Type 3, 0-14 pH, 1000 deg F / 535 C, PSI 1000 / 70 BAR (Graphoil)
Straight Bleeder Cleaners
![straight[1]](http://www.cleanvalve.com/files/straight.jpg)
| MNPT | Description | Drill Dia. | Work Length | Model | ||||
| 1/2″ | Straight Tool | 3/8″ (9mm) | 12″/ 30cm | CKR-3450-L-12″…Options & Parts Kits | ||||
| 1/2″ | Straight Too | l3/8″ (9mm) | 7″/ 17cm | CKR-3450-L-7″ | ||||
| 1/2″ | Straight Tool | 3/8″ (9mm) | 48″/120cm | CKR-5250-L-48″…Options & Parts Kits | ||||
| 1/2″ | Straight Tool | 3/8″ (9mm) | 36″/ 90cm | CKR-5250-L-36″ | ||||
| 1/2″ | Straight Tool | 3/8″ (9mm) | 24″/ 60cm | CKR-5250-L-24″ | ||||
| 1/2″ | Straight Tool | 3/8″ (9mm) | 18″/ 45cm | CKR-5250-L-18″ |
Angle 90 Bleeder Cleaners
| MNPT | Description | Drill Dia. | Work Length | Model | ||||
| 1/2″ | 90 Deg Angle Tool | 3/8″ (9.5mm) | 24″/60cm | CKR-3400-L-24″ … Options | ||||
| 1/2″ | 90 Deg Angle Tool | 3/8″ (9.5mm) | 18″/45cm | CKR-3400-L-18″ | ||||
| 1/2″ | 90 Deg Angle Tool | 3/8″ (9.5mm) | 12″/30cm | CKR-3400-L-12″ | ||||
| 1/2″ | 90 Deg Angle Tool | 3/8″ (9.5mm) | 7″/17cm | CKR-3400-L-7″ |
Angle 60 Bleeder Cleaners
| MNPT | Description | Drill Dia. | Work Length | Model | ||||
| 1/2″ | 60 Deg Angle Tool | 3/8″ (9.5mm) | 24″/60cm | CKR-5200-L-24″ …Options | ||||
| 1/2″ | 60 Deg Angle Tool | 3/8″ (9.5mm) | 18″/45cm | CKR-5200-L-18″ |
For cleaners designed specifically for Fluid Catalytic Cracking Units and other hardened process materials see CAT BOSS™ cleaners
FREE FLOW BOSS™ brochure CLICK HERE
Note. If you cannot locate the correct size or model of tool above see “Contact Us” on this page.
